Match Dscp - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS

MATCH DSCP

match dscp
Overview Use this command to define the DSCP to match against incoming packets.
Use the no variant of this command to remove a previously defined DSCP.
Syntax
match dscp <0-63>
no match dscp
Mode Class Map Configuration
Usage Use the match dscp command to define the match criterion after creating a
class-map.
Examples To configure a class-map named cmap1 with criterion that matches DSCP 56, use
the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To remove a previously defined DSCP from a class-map named cmap1, use the
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
Related class-map
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specify DSCP value (only one value can be specified).
<0-63>
configure terminal
class-map cmap1
configure terminal
class-map cmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match dscp 56
no match dscp
955