(Ipv6 Access-List Named Protocol Filter) - Allied Telesis AT-IX5-28GPX Manual

IP 6 H A C
V ARDWARE CCESS ONTROL
( 6 -
IPV ACCESS LIST NAMED PROTOCOL FILTER

(ipv6 access-list named protocol filter)

Overview Use this ACL filter to add a filter entry for an IPv6 source and destination address
and prefix, with an IP protocol type specified, to the current named IPv6 access-list.
If a sequence number is specified, the new entry is inserted at the specified
location. Otherwise, the new entry is added at the end of the access-list.
Note that specifying the send-to-cpu parameter could result in EPSR healthcheck
messages and other control packets being dropped.
The no variant of this command removes a filter entry for an IPv6 source and
destination address and prefix, with an IP protocol type specified, from the current
named IPv6 access-list. You can specify the filter entry for removal by entering
either its sequence number, or its filter entry profile.
Syntax
[<sequence-number>
{deny|permit|send-to-cpu|send-to-mirror|copy-to-cpu|copy-to-mi
rror} {ipv6|proto <ip-protocol>}
{<ipv6-source-prefix/prefix-length>|<ipv6-source-address>
<ipv6-source-wildcard>|host <ipv6-source-host>|any}
{<ipv6-destination-prefix/prefix-length>|<ipv6-destination-add
ress> <ipv6-destination-wildcard>|host
<ipv6-destination-host>|any}
[<sequence-number>]no
{deny|permit|send-to-cpu|send-to-mirror|copy-to-cpu|copy-to-mi
rror} {ipv6|proto <ip-protocol>}
{<ipv6-source-prefix/prefix-length>|<ipv6-source-address>
<ipv6-source-wildcard>|host <ipv6-source-host>|any}
{<ipv6-destination-prefix/prefix-length>|<ipv6-destination-add
ress> <ipv6-destination-wildcard>|host
<ipv6-destination-host>|any}
no [<sequence-number>]
Parameter
<sequence-number>
deny
permit
send-to-cpu
send-to-mirror
copy-to-cpu
copy-to-mirror
ipv6
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L (ACL) C
IST OMMANDS
)
Description
<1-65535>The sequence number for the filter entry
of the selected access control list.
Specifies packets to reject.
Specifies packets to permit.
Specifies packets to send to the CPU. Specifying this parameter could
result in EPSR healthcheck messages and other control packets being
dropped.
Specifies packets to send to mirror port.
Specifies packets to copy to the CPU.
Specifies packets to copy to the mirror port.
Specifies IPv6 packet.
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
911