Show Power-Inline - Allied Telesis IE340 Series Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE

show power-inline

Overview This command displays the Power over Ethernet (PoE) status for all ports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show power-inline
Mode User Exec and Privileged Exec
Example To display the PoE status for all ports, use the following command:
awplus#
Output Figure 20-2: Example output from show power-inline
awplus#show power-inline
PoE Status:

Nominal Power: 240W
Power Allocated: 15W
Power Requested: 15W
Actual Power Consumption: 2W
Operational Status: On
Power Usage Threshold: 80% (192W)
Detection of legacy devices is disabled
Power Source: PSU
High Availability Network Power: Disabled
Thermal State: Operational
Power management mode: Dynamic

PoE Interface:
Interface Admin
port1.0.5 Enabled
port1.0.6 Enabled
port1.0.7 Enabled
port1.0.8 Enabled
port1.0.9 Enabled
port1.0.10 Enabled
port1.0.11 Enabled
port1.0.12 Enabled
port1.0.13 Enabled
port1.0.14 Enabled
port1.0.15 Enabled
port1.0.16 Enabled
port1.0.17 Enabled
port1.0.18 Enabled
port1.0.19 Enabled
port1.0.20 Enabled
C613-50631-01 Rev A
show power-inline
Pri Oper Power Device
(mW)
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Powered 1800 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Low Off 0 n/a
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
Class Max
(mW)
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
0 15400 [C]
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
826