Telnet - Allied Telesis AT-IX5-28GPX Manual

U A C
SER CCESS OMMANDS

TELNET

telnet
Overview Use this command to open a telnet session to a remote device.
Syntax
telnet {<hostname>|[ip] <ipv4-addr>|[ipv6] <ipv6-addr>}
[<port>]
Mode User Exec and Privileged Exec
Examples To connect to TCP port 2602 on the device at 10.2.2.2, use the command:
awplus#
To connect to the telnet server host.example, use the command:
awplus#
To connect to the telnet server host.example on TCP port 100, use the
command:
awplus#
112 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The host name of the remote system.
<hostname>
Keyword used to specify the IPv4 address or host name of a remote
ip
system.
An IPv4 address of the remote system.
<ipv4-addr>
Keyword used to specify the IPv6 address of a remote system
ipv6
Placeholder for an IPv6 address in the format x:x::x:x, for
<ipv6-addr>
example, 2001:db8::8a2e:7334
Specify a TCP port number (well known ports are in the range 1-
<port>
1023, registered ports are 1024-49151, and private ports are 49152-
65535).
telnet 10.2.2.2 2602
telnet host.example
telnet host.example 100
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A