Show Exception Log - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

SHOW EXCEPTION LOG

show exception log
Overview This command displays the contents of the exception log. When used within a
stacked environment, this command will display the contents of the exception log
for all the stack members.
Syntax
show exception log
Mode User Exec and Privileged Exec
Example To display the exception log, use the command:
awplus#
Output Figure 6-2:
awplus#show exception log
Stack member 1:
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:3746)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-3746.tgz
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:2504)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-2504.tgz
2014 Jan 27 09:58:02 local7.debug awplus corehandler : Process ospfd (PID:1512)
signal 5, core dumped to /flash/ospfd-x610-5.4.3-3.7-1-1390816682-1512.tgz
-------------------------------------------------------------------------
Stack member 2:
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
-------------------------------------------------------------------------
2014 Jan 27 09:58:16 local7.debug awplus-2 corehandler : Process imi (PID:1427)
signal 5, core dumped to /flash/imi-x610-5.4.3-3.7-2-1390816696-1427.tgz
-------------------------------------------------------------------------
314 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show exception log
Example output from the show exception log command on a
device
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A