Show System Interrupts; And Configuration - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM INTERRUPTS

show system interrupts
Overview Use this command to display the number of interrupts for each IRQ (Interrupt
Request) used to interrupt input lines on a PIC (Programmable Interrupt Controller)
on your device.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the

and Configuration

Syntax
show system interrupts
Mode User Exec and Privileged Exec
Example To display information about the number of interrupts for each IRQ in your device,
use the command:
awplus#
Output Figure 5-19: Example output from the show system interrupts command
awplus#show system interrupts
CPU0
5: 10428098 Enabled
6: 0 Enabled
7: 300725368 Enabled
18: 598364339 Enabled
22: 4909 Enabled
31: 1 Enabled
35: 2 Enabled
40: 4 Enabled
42: 0 Enabled
43: 0 Enabled
ERR: 0
Related show system environment
Commands
250 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Guide.
show system interrupts
0
0
0
0
0
0 MIPS-GPIO
0 MIPS-GPIO
0 MIPS-GPIO
0 MIPS-GPIO
0 MIPS-GPIO
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
MIPS linux-kernel-bde
MIPS bcma-usb-ohci:usb1, bcma-usb-ehci:usb2
MIPS timer
MIPS-CC bcma_i2c
MIPS-CC serial
GPIO-Ethernet PHY
GPIO-ECO Button
PSU Interrupt
PSU2 power good
PSU1 power good
C613-50057-01 REV A