Show Counter Log - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

SHOW COUNTER LOG

show counter log
Overview This command displays log counter information.
Syntax
show counter log
Mode User Exec and Privileged Exec
Example To display the log counter information, use the command:
awplus#
Output Figure 6-1:
Table 6-1: Parameters in output of the show counter log command
Related show log config
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show counter log
Example output from the show counter log command
Log counters
Total Received
Total Received P0
Total Received P1
Total Received P2
Total Received P3
Total Received P4
Total Received P5
Total Received P6
Total Received P7
Parameter
Total Received
Total Received P0
Total Received P1
Total Received P2
Total Received P3
Total Received P4
Total Received P5
Total Received P6
Total Received P7
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
......... 2328
......... 0
......... 0
......... 1
......... 9
......... 32
......... 312
......... 1602
......... 372
Description
Total number of messages received by the log
Total number of Priority 0 (Emergency) messages
received
Total number of Priority 1 (Alert) messages received
Total number of Priority 2 (Critical) messages received
Total number of Priority 3 (Error) messages received
Total number of Priority 4 (Warning) messages received
Total number of Priority 5 (Notice) messages received
Total number of Priority 6 (Info) messages received
Total number of Priority 7 (Debug) messages received
313