Chapter 25: Ipv6 Software Access Control List (Acl) Commands; Introduction - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch

Hide thumbs Also See for AT-IX5-28GPX:

Table of Contents

This chapter provides an alphabetical reference for the IPv6 Software Access

Control List (ACL) commands, and contains detailed command information and

command examples about IPv6 software ACLs as applied to Routing and

Multicasting, which are not applied to interfaces.

For information about ACLs, see the

To apply ACLs to an LACP channel group, apply it to all the individual switch ports

in the channel group. To apply ACLs to a static channel group, apply it to the static

channel group itself. For more information on link aggregation see the following

Note that text in parenthesis in command names indicates usage not keyword

entry. For example, ipv6-access-list (named) indicates named IPv6 ACLs entered

as ipv6-access-list <name> where <name> is a placeholder not a keyword.

Note also that parenthesis surrounding ACL filters indicates the type of ACL filter

not the keyword entry in the CLI. For example, (ipv6 access-list standard IPv6

filter) represents command entry in the format:

[<sequence-number>] {deny|permit} {<IPv6-source-address/prefix-length>|any}.

Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch

Access Control List

(ACL) Commands

Link Aggregation Feature Overview and Configuration

Link Aggregation Commands

: Software ACLs will deny access unless explicitly permitted by an ACL action.

AlliedWare Plus™ Operating System - Version 5.4.5-0.x

IPv6 Software

ACL Feature Overview and Configuration

C613-50057-01 REV A