Banner Exec - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

BANNER EXEC

banner exec
Overview This command configures the User Exec mode banner that is displayed on the
console after you login. The banner exec default command restores the User Exec
banner to the default banner. Use the no banner exec command to disable the
User Exec banner and remove the default User Exec banner.
Syntax
banner exec <banner-text>
banner exec default
no banner exec
Default By default, the AlliedWare Plus™ version and build date is displayed at console
login, such as:
Mode Global Configuration
Examples To configure a User Exec mode banner after login, enter the following commands:
194 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
AlliedWare Plus (TM) 5.4.5 03/31/14 00:44:25
awplus#configure terminal
awplus(config)#banner exec enable to move to Priv Exec mode
awplus(config)#exit
awplus#exit
awplus login: manager
Password:
enable to move to Priv Exec mode
awplus>
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A