Access-List (Hardware Ip Numbered) - Allied Telesis AT-IX5-28GPX Manual

IP 4 H A C
V ARDWARE CCESS ONTROL
- ( IP
ACCESS LIST HARDWARE NUMBERED

access-list (hardware IP numbered)

Overview This command creates an access-list for use with hardware classification, such as
QoS. The access-list will match on either TCP or UDP type packets that have the
specified source and destination IP addresses and Layer 4 port values or ranges.
The parameter any may be specified if an address does not matter and the port
values are optional.
The no variant of this command removes the previously specified IP hardware
access-list.
Syntax [ip]
access-list <3000-3699>
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|send-to
-cpu} ip <source> <destination>
Syntax [icmp]
access-list <3000-3699>
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|send-to
-cpu} icmp <source> <destination> [icmp-type <type-number>]
no access-list <3000-3699>
Table 22-2: Parameters in the access-list (hardware IP numbered) command -
824 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L (ACL) C
IST OMMANDS
)
ip|icmp
Parameter Description
Hardware IP access-list number.
<3000-3699>
Access-list rejects packets that match the source and destination
deny
filtering specified with this command.
Access-list permits packets that match the source and
permit
destination filtering specified with this command.
Specify packets to copy to the CPU.
copy-to-cpu
Specify packets to copy to the mirror port.
copy-to-mirror
Specify packets to send to the mirror port.
send-to-mirror
Specify packets to send to the CPU.
send-to-cpu
ICMP packet.
icmp
IP packet.
ip
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A