Storm-Rate - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
-
STORM RATE

storm-rate

Overview Sets the data rate that triggers the storm-action. The rate is in kbps and the range
is from 1kbps to 40Gbps.
Note that this setting is made in conjunction with the
Use the no variant of this command to negate the storm-rate command.
Syntax
storm-rate <1-40000000>
no storm-rate
Default No default
Mode Policy Map Class Configuration
Usage This setting is made in conjunction with the
Examples To limit the data rate to 100Mbps, use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
To negate the limit set previously, use the following commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
Related storm-action
Commands
storm-downtime
storm-protection
storm-window
998 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
<1-40000000> The range of the storm-rate.
configure terminal
policy-map pmap2
configure terminal
policy-map pmap2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
storm-window
class cmap2
storm-rate 100000
class cmap2
no storm-rate
storm-window command.
command.
C613-50057-01 REV A