Spanning-Tree Transmit-Holdcount - Allied Telesis AT-IX5-28GPX Manual

S T C
PANNING REE OMMANDS
- -
SPANNING TREE TRANSMIT HOLDCOUNT

spanning-tree transmit-holdcount

Overview Use this command to set the maximum number of BPDU transmissions that are
held back.
Use the no variant of this command to restore the default transmit hold-count
value.
Syntax
spanning-tree transmit-holdcount
no spanning-tree transmit-holdcount
Default Transmit hold-count default is 3.
Mode Global Configuration
Example
awplus#
awplus(config)#
538 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
spanning-tree transmit-holdcount
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A