Match Vlan - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS

MATCH VLAN

match vlan
Overview Use this command to define the VLAN ID as match criteria.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax
match vlan <1-4094>
no match vlan
Mode Class Map Configuration
Examples To configure a class-map named cmap1 to include traffic from VLAN 3, use the
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To disable the configured VLAN ID as a match criteria for the class-map named
cmap1, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
964 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The VLAN number.
<1-4094>
configure terminal
class-map cmap1
configure terminal
class-map cmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match vlan 3
no match vlan
C613-50057-01 REV A