Show Autoboot - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS

SHOW AUTOBOOT

show autoboot
Overview This command displays the Autoboot configuration and status.
Syntax
show autoboot
Mode Privileged Exec
Example To show the Autoboot configuration and status, use the command:
awplus#
Output Figure 3-5:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
USB file autoboot.txt exists
Restore information on USB
Autoboot enable in autoboot.txt
Restore release file
(file exists)
Restore configuration file
Figure 3-6:
awplus#show autoboot
Autoboot configuration
--------------------------------------------------------------------------------
Autoboot status
External media source
Related autoboot enable
Commands
create autoboot
show boot
150 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
show autoboot
Example output from the show autoboot command
: enabled
: yes
: yes
: IX5-5.4.5-0.1.rel
: network_1.cfg (file exists)
Example output from the show autoboot command when an
external media source is not present
: enabled
: USB not found.
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A