Spanning-Tree Mst Instance - Allied Telesis AT-IX5-28GPX Manual

S T C
PANNING REE OMMANDS
-
SPANNING TREE MST INSTANCE

spanning-tree mst instance

Overview Use this command in Interface Configuration mode to assign a Multiple Spanning
Tree instance (MSTI) to a switch port or channel group.
Note that ports are automatically configured to send and receive spanning-tree
information for the associated MSTI when VLANs are assigned to MSTIs using the
instance vlan (MSTP)
Use the no variant of this command in Interface Configuration mode to remove the
MSTI from the specified switch port or channel group.
Syntax
spanning-tree mst instance <instance-id>
no spanning-tree mst instance <instance-id>
Default A port automatically becomes a member of an MSTI when it is assigned to a VLAN.
Mode Interface Configuration mode for a switch port or channel group.
Usage You can disable automatic configuration of member ports of a VLAN to an
associated MSTI by using a no spanning-tree mst instance command to remove
the member port from the MSTI. Use the spanning-tree mst instance command
to add a VLAN member port back to the MSTI.
Examples
awplus#
awplus(config)#
awplus(config-if)#
awplus#
awplus(config)#
awplus(config-if)#
Related instance vlan (MSTP)
Commands
spanning-tree mst instance path-cost
spanning-tree mst instance priority
spanning-tree mst instance restricted-role
spanning-tree mst instance restricted-tcn
520 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
command.
Parameter Description
<instance-id> <1-15> Specify the MST instance ID. The MST instance must have
already been created using the
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
spanning-tree mst instance 3
no spanning-tree mst instance 3
instance vlan (MSTP) command.
C613-50057-01 REV A