Security-Password History - Allied Telesis AT-IX5-28GPX Manual

U A C
SER CCESS OMMANDS
-
SECURITY PASSWORD HISTORY

security-password history

Overview This command specifies the number of previous passwords that are unable to be
reused. A new password is invalid if it matches a password retained in the
password history.
The no security-password history command disables the security password
history functionality.
Syntax
security-password history <0-15>
no security-password history
Default The default history value is 0, which will disable the history functionality.
Mode Global Configuration
Examples To restrict reuse of the three most recent passwords, use the command:
awplus#
awplus(config)#
To allow the reuse of recent passwords, use the command:
awplus#
awplus(config)#
Validation show running-config security-password
Commands
show security-password configuration
Related security-password forced-change
Commands
security-password lifetime
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
security-password warning
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The allowable range of previous passwords to match against. A
<0-15>
value of 0 will disable the history functionality and is equivalent to
the no security-password history command. If the history
functionality is disabled, all users' password history is reset and all
password history is lost.
configure terminal
security-password history 3
configure terminal
no security-password history
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
95