Boot System Backup - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS

BOOT SYSTEM BACKUP

boot system backup
Overview Use this command to set a backup release file to load if the main release file cannot
be loaded.
Use the no variant of this command to remove the backup release file as the
backup boot file.
Syntax
boot system backup <filepath-filename>
no boot system backup
Mode Global Configuration
Examples To specify the file IX5-5.4.5-0.1.rel as the backup to the main release file,
use the commands:
awplus#
awplus(config)#
To remove the file IX5-5.4.5-0.1.rel as the backup to the main release file,
use the commands:
awplus#
awplus(config)#
Related boot config-file
Commands
boot config-file backup
boot system
show boot
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<filepath-filename>
backup
configure terminal
boot system backup flash:/IX5-5.4.5-0.1.rel
configure terminal
no boot system backup flash:/IX5-5.4.5-0.1.rel
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Filepath and name of a backup release file.
Backup release files must be in the Flash filesystem.
Valid release files must have a . rel extension.
The specified file is a backup release file.
127