Show Debugging Gvrp - Allied Telesis AT-IX5-28GPX Manual

GVRP C
OMMANDS

SHOW DEBUGGING GVRP

show debugging gvrp
Overview Use this command to display the GVRP debugging option set.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show debugging gvrp
Mode User Exec and Privileged Exec
Example Enter the following commands to display GVRP debugging output on the console:
awplus#
awplus(config)#
awplus(config)#
awplus#
Output See sample output from the show debugging gvrp command after entering
debug gvrp all:
Related debug gvrp
Commands
598 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Guide.
configure terminal
debug gvrp all
exit
show debugging gvrp
GVRP debugging status:
GVRP Event debugging is on
GVRP CLI debugging is on
GVRP Timer debugging is on
GVRP Packet debugging is on
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
C613-50057-01 REV A