Show Dos Interface - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch

Hide thumbs Also See for AT-IX5-28GPX:

Table of Contents

SHOW DOS INTERFACE

show dos interface

Use this command to display the Denial-of-Service (DoS) features configured on a

switch port interface from the

descriptions of DoS attack types.

show dos interface {<port-list>}

Privileged Exec

Figure 23-1: Example output from the show dos interface command prior to a

Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch

Specify the switch port or port list to display DoS configuration

options set with the

awplus#configure terminal

Enter configuration commands, one per line. End with CTNTL/Z.

awplus(config)#interface port1.0.1

awplus(config-if)#dos synflood action shutdown

awplus(config-if)#exit

awplus(config)#exit

awplus#show dos interface port1.0.1

DoS settings

for interface port1.0.1

-----------------------------------------

ping-of-death

Attacks detected : 0

AlliedWare Plus™ Operating System - Version 5.4.5-0.x

command. See the

: Shutdown port

C613-50057-01 REV A