Ip Igmp Snooping Mrouter - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS

IP IGMP SNOOPING MROUTER

ip igmp snooping mrouter
Overview Use this command to statically configure the specified port as a multicast router
port for IGMP Snooping for an interface. This command applies to interfaces
configured for IGMP Snooping.
Use the no variant of this command to remove the static configuration of the port
as a multicast router port.
Syntax
ip igmp snooping mrouter interface <port>
no ip igmp snooping mrouter interface <port>
Mode Interface Configuration for a VLAN interface.
Example This example shows the switch port interface port1.0.2 statically configured to
be a multicast router interface for the VLAN interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
Related show ip igmp snooping mrouter
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The port may be a device port (e.g. port1.0.4), a static channel
<port>
group (e.g. sa3), or a dynamic (LACP) channel group (e.g. po4).
configure terminal
interface vlan2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
ip igmp snooping mrouter interface port1.0.2
759