Show System - Allied Telesis AT-IX5-28GPX Manual

S C M
YSTEM ONFIGURATION AND

SHOW SYSTEM

show system
Overview This command displays general system information about the device, including
the hardware installed, memory, and software versions loaded. It also displays
location and contact details when these have been set.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show system
Mode User Exec and Privileged Exec
Example To display configuration information, use the command:
awplus#
Usage For a stacked configuration, if this command is entered on the stack master, it will
display the information for all the stack members. A stack member heading will be
displayed to distinguish the different information for every stack member.
Output Figure 5-17: Example output from the show system command
awplus#show system
Switch System Status
Board ID Bay
--------------------------------------------------------------------------------
Base 386
PSU 335 PSU1
--------------------------------------------------------------------------------
RAM: Total: 495756 kB Free: 391896 kB
Flash: 63.0MB Used: 45.5MB Available: 17.5MB
--------------------------------------------------------------------------------
Environment Status : Normal
Uptime
Bootloader version : 3.0.0-devel
Current software
Software version
Build date
Current boot config: flash:/default.cfg (file exists)
System Name
awplus
System Contact
System Location
awplus#
Related show system environment
Commands
248 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
ONITORING OMMANDS
Guide.
show system
Board Name
IX5-28GPX
PWR800
: 0 days 01:20:56
: IX5-5.4.5-0.1.rel
: 5.4.4
: Mon Mar 03 18:37:04 NZDT 2014
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
"Getting Started with AlliedWare Plus" Feature Overview
Mon Mar 10 08:42:16 2014
Rev
X5-0
C-0
Serial number
A25DD5002
421LC7023
C613-50057-01 REV A