Ipv6 Access-List Extended Proto - Allied Telesis AT-IX5-28GPX Manual

IP 6 S A C
V OFTWARE CCESS ONTROL
6 -
IPV ACCESS LIST EXTENDED PROTO

ipv6 access-list extended proto

Overview Use this command when configuring an IPv6 extended access-list for filtering
frames that permit or deny packets with a specific value based on the IP protocol
number specified.
The no variant of this command removes a specified IPv6 extended access-list with
an IP protocol number.
Syntax
ipv6 access-list extended <list-name> {deny|permit} proto
<ip-protocol>} {<ipv6-source-address/prefix>|any}
{<ipv6-destination-address/prefix>|any} [log]
no ipv6 access-list extended <list-name> {deny|permit} proto
<ip-protocol>{<ipv6-source-address/prefix>|any}
{<ipv6-destination-address/prefix>|any} [log]
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L (ACL) C
IST OMMANDS
Parameter Description
A user-defined name for the IPv6 software extended access- list.
<list-name>
Specifies the packets to reject.
deny
Specifies the packets to accept.
permit
The IP Protocol type specified by it protocol number <1- 255>.
proto
<ip-protocol> The IP protocol number, as defined by IANA (Internet Assigned
Numbers Authority
www.iana.org/assignments/protocol-numbers)
Protocol Number
1
2
3
4
5
6
8
9
11
17
20
27
28
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Protocol Description [RFC Reference]
Internet Control Message [RFC792]
Internet Group Management [RFC1112]
Gateway-to-Gateway [RFC823]
IP in IP [RFC2003]
Stream [RFC1190] [RFC1819]
TCP (Transmission Control Protocol) [RFC793]
EGP (Exterior Gateway Protocol) [RFC888]
IGP (Interior Gateway Protocol) [IANA]
Network Voice Protocol [RFC741]
UDP (User Datagram Protocol) [RFC768]
Host monitoring [RFC869]
RDP (Reliable Data Protocol) [RFC908]
IRTP (Internet Reliable Transaction Protocol)
[RFC938]
931