Show Power-Inline - Allied Telesis x310-26FT Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE

show power-inline

Overview This command displays the Power over Ethernet (PoE) status for all ports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show power-inline
Mode User Exec and Privileged Exec
Example To display the PoE status for all ports, use the following command:
awplus#
Output Figure 17-2: Example output from show power-inline
awplus#show power-inline
PoE Status:

Nominal Power: 370W
Power Allocated: 246W

Actual Power Consumption: 151W
Operational Status: On
Power Usage Threshold: 80% (296W)

PoE Interface:
Interface Admin
port1.0.1 Enabled Low
port1.0.2 Enabled High Powered
port1.0.3 Enabled Low
port1.0.4 Enabled Crit Powered 14784
port1.0.5 Enabled Crit Powered
...
Table 1: Parameters in the show power-inline command output
C613-50103-01 REV A
show power-inline
Pri Oper Power
Powered 3840
6720
Powered 14784
3840
Parameter
Nominal Power
Power Allocated
Actual Power
Consumption
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Device Class Max(mW)
n/a 1
n/a 2
n/a 3 15400 [C]
n/a 3 15400 [C]
n/a 1
Description
The nominal power available on the switch in watts (W).
The current power allocated in watts (W) that is available to
be drawn by any connected Powered Devices (PDs). This is
updated every 5 seconds.
The current power consumption in watts (W) drawn by all
connected Powered Devices (PDs). This is updated every 5
seconds.
"Getting Started
Guide.
4000 [C]
7000 [C]
4000 [C]
645