Wrr-Queue Egress-Rate-Limit Queues - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
- - -
WRR QUEUE EGRESS RATE LIMIT QUEUES

wrr-queue egress-rate-limit queues

Overview Sets a limit on the amount of traffic that can be transmitted per second from these
queues. The default unit is in Kb, but Mb or Gb can also be specified. The minimum
is 651Kb.
Syntax
wrr-queue egress-rate-limit <bandwidth> queues
{0}[1][2][3][4][5][6][7]
no
wrr-queue egress-rate-limit <bandwidth>
queues {0}[1][2][3][4][5][6][7]
Mode Interface Configuration
Example To limit the egress rate of queues 0, 1 and 2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
2
Related show mls qos interface
Commands
1002 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Bandwidth <1-40000000 kbits> (usable units: k, m, g).
<bandwidth>
Selects one or more queues to apply the bandwidth limit to as
{0}[1]...[7]
specified in the preceding <bandwidth> parameter.
configure terminal
interface port1.0.1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
wrr-queue egress-rate-limit 500M queues 0 1
C613-50057-01 REV A