Match Cos - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS

MATCH COS

match cos
Overview Use this command to define a COS to match against incoming packets.
Use the no variant of this command to remove CoS.
Syntax
match cos <0-7>
no match cos
Mode Class Map Configuration
Examples To set the class-map's CoS to 4, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To remove CoS from a class-map, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
954 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specify the CoS value.
<0-7>
configure terminal
class-map cmap1
configure terminal
class-map cmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match cos 4
no match cos
C613-50057-01 REV A