Ip Name-Server - Allied Telesis AT-IX5-28GPX Manual

IP A P
DDRESSING AND ROTOCOL
-
IP NAME SERVER

ip name-server

Overview This command adds IPv4 or IPv6 DNS server addresses. The DNS client on your
device sends DNS queries to IP addresses in this list when trying to resolve a host
name. Host names cannot be resolved until you have added at least one server to
this list. A maximum of three name servers can be added to this list.
The no variant of this command removes the specified DNS name-server address.
Syntax
ip name-server <ip-addr>
no ip name-server <ip-addr>
Mode Global Configuration
Usage When your device is using its DHCP client for an interface, it can receive Option 6
messages from the DHCP server. This option appends the name server list with
more DNS servers.
For more information about DHCP and DNS, see the
Configuration
Examples To allow a device to send DNS queries to a DNS server with the IPv4 address
10.10.10.5, use the commands:
awplus#
awplus(config)#
To enable your device to send DNS queries to a DNS server with the IPv6 address
2001:0db8:010d::1, use the commands:
awplus#
awplus(config)#
Related ip domain-list
Commands
ip domain-lookup
ip domain-name
show ip dns forwarding cache
show ip name-server
636 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C
OMMANDS
Guide.
configure terminal
ip name-server 10.10.10.5
configure terminal
ip name-server 2001:0db8:010d::1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IP Feature Overview and
C613-50057-01 REV A