Match Inner-Vlan - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
-
MATCH INNER VLAN

match inner-vlan

Overview Use this command to define the inner VLAN ID as match criteria.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax
match inner-vlan <1-4094>
no match inner-vlan
Mode Class Map Configuration
Usage This command is used in double-tagged networks to match on a VLAN ID
belonging to the client network. For more information on VLAN double-tagged
networks, see the
Examples To configure a class-map named cmap1 to match traffic from inner VLAN 3, use the
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To disable the configured VLAN ID as a match criteria for the class-map named
cmap1, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
960 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The VLAN number.
<1-4094>
VLAN Feature Overview and Configuration
configure terminal
class-map cmap1
configure terminal
class-map cmap1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
match inner-vlan 3
no match inner-vlan
Guide.
C613-50057-01 REV A