Log Buffered - Allied Telesis AT-IX5-28GPX Manual

L C
OGGING OMMANDS

LOG BUFFERED

log buffered
Overview This command configures the device to store log messages in RAM. Messages
stored in RAM are not retained on the device over a restart. Once the buffered log
reaches its configured maximum allowable size old messages will be deleted to
make way for new ones.
Syntax
log buffered
no log buffered
Default The buffered log is configured by default.
Mode Global Configuration
Examples To configured the device to store log messages in RAM use the following
commands:
awplus#
awplus(config)#
To configure the device to not store log messages in a RAM buffer use the
following commands:
awplus#
awplus(config)#
Validation show log config
Commands
Related default log buffered
Commands
log buffered (filter)
log buffered size
282 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
log buffered
configure terminal
no log buffered
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A