Q
S C
O
OMMANDS
-
REMARK NEW
COS
remark new-cos
Overview
This command enables you to configure and remark either or both of:
•
•
Syntax
remark new-cos <0-7> [internal|external|both]
no remark new-cos [internal|external|both]
Mode
Policy Map Class Configuration
Usage
The default CoS to Queue mappings are shown in the following table:
The relationship between this command and the CoS to queue map is shown in
the following figure.
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
the CoS flag in the data packet
the input into the CoS to queue map, thus changing the destination egress
queue.
Parameter
Description
The new value for the CoS flag and/or the input into the CoS to queue
<0-7>
map.
Remarks the CoS flag in the packet.
external
Remarks the new-CoS input into the CoS to queue map.
internal
Remarks (with the same value) both the CoS flag in the packet and the
both
input to the CoS to queue map.
CoS Value
0
Egress Queue No
2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
1
2
3
0
1
3
4
5
6
4
5
6
7
7
979