Show Ipv6 Mif - Allied Telesis AT-IX5-28GPX Manual

M C
ULTICAST OMMANDS
6
SHOW IPV MIF

show ipv6 mif

Overview Use this command to display the contents of the IPv6 Multicast Routing
Information Base (MRIB) MIF table.
Syntax
show ipv6 mif [<interface>]
Mode User Exec and Privileged Exec
Example
awplus#
awplus#
Output Figure 19-11: Example output from the show ipv6 mif command
Figure 19-12: Example output from the show ipv6 mif command with the
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The interface to display information about.
<interface>
show ipv6 mif
show ipv6 mif vlan2
awplus#show ipv6 mif
Interface Mif Owner
Idx Module
vlan3 0 MLD/MLD Proxy-Service 03:28:48
vlan2 1 MLD/MLD Proxy-Service 03:28:48
vlan1 2 MLD/MLD Proxy-Service 03:28:48
interface parameter vlan2 specified
Interface Mif Owner
Idx Module
vlan2 0 PIM-SMv6
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Uptime
TTL Remote
Address
1 0.0.0.0
Uptime
00:05:17
733