Auth Timeout Supp-Timeout - Allied Telesis AT-IX5-28GPX Manual

A C
UTHENTICATION OMMANDS
-
AUTH TIMEOUT SUPP TIMEOUT

auth timeout supp-timeout

Overview This command sets the timeout of the waiting response from the supplicant (client
device) on a given interface.
The no variant of this command resets the supplicant timeout to the default (30
seconds).
Syntax
auth timeout supp-timeout <1-65535>
no auth timeout supp-timeout
Default The supplicant timeout of port authentication is 30 seconds.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Examples To set the server timeout to 2 seconds for interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset the server timeout to the default (30 seconds) for interface port1.0.2,
use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show dot1x
Commands
show dot1x interface
show running-config
1064 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Seconds.
<1-65535>
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
auth timeout supp-timeout 2
no auth timeout supp-timeout
C613-50057-01 REV A