Show Running-Config - Allied Telesis AT-IX5-28GPX Manual

F M C
ILE ANAGEMENT OMMANDS
-
SHOW RUNNING CONFIG

show running-config

Overview This command displays the current configuration of the device. The output
includes all non-default configuration; default settings are not displayed.
You can control the output in any one of the following ways:
•
•
•
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax
show running-config
Mode Privileged Exec and Global Configuration
Example To display the current dynamic configuration of your device, use the command:
awplus#
156 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
To display only lines that contain a particular word, enter | include word
after the command
To start the display at the first line that contains a particular word, enter |
begin word after the command
To save the output to a file, enter > filename after the command
"Getting Started with AlliedWare Plus" Feature Overview
Guide.
show running-config
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A