Dot1X Max-Auth-Fail - Allied Telesis AT-IX5-28GPX Manual

802.1X C
OMMANDS
1 - -
DOT X MAX AUTH FAIL

dot1x max-auth-fail

Overview Use this command to configure the maximum number of login attempts for a
supplicant (client device) using the auth-fail vlan feature, when using 802.1X port
authentication on an interface.
The no variant of this command resets the maximum login attempts for a
supplicant (client device) using the auth-fail vlan feature, to the default
configuration of 3 login attempts.
Syntax
dot1x max-auth-fail <0-10>
no dot1x max-auth-fail
Default The default maximum number of login attempts for a supplicant on an interface
using 802.1X port authentication is three (3) login attempts.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port.
Usage This command sets the maximum number of login attempts for supplicants on an
interface. The supplicant is moved to the auth-fail VLAN from the Guest VLAN after
the number of failed login attempts using 802.1X authentication is equal to the
number set with this command.
See the
about:
•
•
Examples To configure the maximum number of login attempts for a supplicant on interface
port1.0.2 to a single (1) login attempt, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To configure the maximum number of login attempts for a supplicant on interface
port1.0.2 to the default number of three (3) login attempts, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specify the maximum number of login attempts for supplicants
<0-10>
on an interface using 802.1X port authentication.
Authentication Feature Overview and Configuration Guide
the auth-fail VLAN feature, and
restrictions regarding combinations of authentication enhancements
working together
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
dot1x max-auth-fail 1
no dot1x max-auth-fail
for information
1011