Show Mls Qos Interface Storm-Status - Allied Telesis AT-IX5-28GPX Manual

Q S C
O OMMANDS
SHOW MLS QOS INTERFACE STORM

show mls qos interface storm-status

Overview Show the current configuration and status of the QoS Storm Protection (QSP) on
the given port.
Syntax
show mls qos interface <port> storm-status
Mode User Exec and Privileged Exec
Example To see the QSP status on port1.0.1, use command:
awplus#
Output Figure 26-7: Example output from the show mls qos interface storm-status
Related storm-action
Commands
storm-downtime
storm-protection
storm-rate
storm-window
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
-
STATUS
Parameter Description
Switch port.
<port>
show mls qos interface port1.0.1 storm-status
command
Interface:
Storm-Protection:
Port-status:
Storm Action:
Storm Window:
Storm Downtime:
Timeout Remaining:
Last read data-rate: 0 kbps
Storm Rate:
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
port1.0.1
Enabled
Enabled
vlandisable
5000 ms
0 s
0 s
1000 kbps
991