Multicast Commands; Introduction - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

19

Introduction

Overview
This chapter provides an alphabetical reference of generic multicast commands.
For commands for particular multicast protocols, see:
NOTE
per RFC 3306.The IPv6 unicast prefix reserved for documentation is 2001:0db8::/32 as
per RFC 3849. Using the base /32 prefix the IPv6 multicast prefix for 2001:0db8::/32 is
ff3x:20:2001:0db8::/64. Where an RP address is 2001:0db8::1 the embedded RP
multicast prefix is ff7x:120:2001:0db8::/96. For ASM (Any-Source Multicast) the IPV6
multicast addresses allocated for documentation purposes are ff0x::0db8:0:0/96 as per
RFC 6676. This is a /96 prefix so that it can be used with group IDs as per RFC 3307. These
addresses should not be used for practical networks (other than for testing purposes),
nor should they appear in any public network.
The IPv6 addresses shown use the address space 2001:0db8::/32, defined in RFC 3849
for documentation purposes. These addresses should not be used for practical
networks (other than for testing purposes) nor should they appear on any public
network.
Command List
705
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
IGMP and IGMP Snooping
MLD and MLD Snooping Commands
: The IPv6 Multicast addresses shown can be derived from IPv6 unicast prefixes as
"clear ip
mroute" on page 707
"clear ip mroute
statistics" on page 708
"clear ipv6
mroute" on page 709
"clear ipv6 mroute
statistics" on page 710
"debug nsm
mcast" on page 711
"debug nsm
mcast6" on page 712
"ip
mroute" on page 713
"ip multicast
forward-first-packet" on page 715
"ip multicast
route" on page 716
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Multicast
Commands
Commands.
C613-50057-01 REV A

Advertisement

Table of Contents
loading

Table of Contents