Ipv6 Route - Allied Telesis AT-IX5-28GPX Manual

IP 6 C
V OMMANDS
6
IPV ROUTE

ipv6 route

Overview Use this command to establish the distance for static routes of a network prefix.
Use the no variant of this command to disable the distance for static routes of the
network prefix.
Syntax
ipv6 route <dest-prefix> <dest-prefix/length>
{<gateway-ip>|<gateway-name>} [<distvalue>]
no ipv6 route <dest-prefix> <dest-prefix/length>
{<gateway-ip>|<gateway-name>} [<distvalue>]
Mode Global Configuration
Example
awplus#
awplus(config)#
Validation show running-config
Commands
show ipv6 route
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<dest-prefix/
length>
<gateway-ip>
<distvalue>
<gateway-name>
configure terminal
ipv6 route
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Specifies the IP destination prefix.
The IPv6 address prefix uses the format X:X::/prefix-length.
The prefix-length is usually set between 0 and 64.
Specifies the IP gateway (or next hop) address. The IPv6
address uses the format X:X::X:X/Prefix-Length. The
prefix-length is usually set between 0 and 64.
Specifies the administrative distance for the route. Valid
values are from 1 to 255.
Specifies the name of the gateway (or next hop) interface.
myintname 322001:0db8::1/128
689