M
C
ULTICAST
OMMANDS
CLEAR IP MROUTE
clear ip mroute
Overview
Use this command to delete entries from the IPv4 multicast routing table.
NOTE
to clear IGMP group membership records.
Syntax
clear ip mroute {*|<ipv4-group-address>
[<ipv4-source-address>]} [pim sparse-mode]
Mode
Privileged Exec
Usage
When this command is used, the Multicast Routing Information Base (MRIB) clears
the IPv4 multicast route entries in its IPv4 multicast route table, and removes the
entries from the multicast forwarder. The MRIB sends a "clear" message to the
multicast protocols. Each multicast protocol has its own "clear" multicast route
command. The protocol-specific "clear" command clears multicast routes from
PIM Sparse Mode, and also clears the routes from the MRIB.
Examples
awplus#
awplus#
Related
ip multicast route
Commands
show ip mroute
C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
: If you use this command, you should also use the
Parameter
Description
Deletes all multicast routes.
*
Group IPv4 address, in dotted decimal notation in the format
<ipv4-group-
A.B.C.D.
address>
Source IPv4 address, in dotted decimal notation in the format
<ipv4-source-
A.B.C.D.
address>
pim sparse-mode Clear specified IPv4 multicast route(s) for PIM Sparse Mode only.
clear ip mroute 225.1.1.1 192.168.3.3
clear ip mroute *
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
clear ip igmp group
command
707