Q
S C
O
OMMANDS
MLS QOS ENABLE
mls qos enable
Overview
Use this command to globally enable QoS on the switch or stack.
Use the no variant of this command to globally disable QoS and remove all QoS
configuration. The no variant of this command removes all class-maps,
policy-maps, and policers that have been created. Running the no mls qos
command will therefore remove all pre-existing QoS configurations on the switch.
Mode
Global Configuration
Syntax
mls qos enable
no mls qos
Example
To enable QoS on the switch, use the commands:
awplus#
awplus(config)#
966
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
mls qos enable
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A