Ip Igmp Snooping Routermode - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS

IP IGMP SNOOPING ROUTERMODE

ip igmp snooping routermode
Overview Use this command to set the destination IP addresses as a router multicast address,
according to the routermode (all multicast addresses, default multicast addresses,
specified multicast addresses).
Use the no variant of this command to the default. You can also remove a specified
IP address from a custom list of multicast addresses.
Syntax
ip igmp snooping routermode
{all|default|ip|multicastrouter|address <ip-address>}
no ip igmp snooping routermode [address <ip-address>]
762 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
all
default
ip
multicastrouter
address
<ip-address>
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
All reserved multicast addresses (224.0.0.x).
Packets from all possible addresses in range 224.0.0.x are set as
routers.
Default set of reserved multicast addresses.
Packets from 224.0.0.1, 224.0.0.2, 224.0.0.4, 224.0.0.5, 224.0.0.6,
224.0.0.9, 224.0.0.13, 224.0.0.15 and 224.0.0.24 are set as
routers.
Custom reserved multicast addresses.
Custom IP address in the 224.0.0.x range are set as router
multicast addresses using the ip igmp snooping routermode
address command.
DVMRP (224.0.0.4) and PIM (224.0.0.13) multicast addresses are
set as routers.
Specify the multicast address in the 224.0.0.x range for use
after issuing an ip igmp snooping routermode ip command
IPv4 multicast address (224.0.0.x)
C613-50057-01 REV A