Lacp System-Priority - Allied Telesis AT-IX5-28GPX Manual

L A C
INK GGREGATION OMMANDS
-
LACP SYSTEM PRIORITY

lacp system-priority

Overview Use this command to set the system priority of a local system. This is used in
determining the system responsible for resolving conflicts in the choice of
aggregation groups.
Use the no variant of this command to reset the system priority of the local system
to the default.
Syntax
lacp system-priority <1-65535>
no lacp system-priority
Default The default is 32768.
Mode Global Configuration
Example
awplus#
awplus(config)#
546 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
LACP system priority. Lower numerical values have higher priorities.
<1-65535>
configure terminal
lacp system-priority 6700
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A