Ip Igmp Last-Member-Query-Count - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS
- - -
IP IGMP LAST MEMBER QUERY COUNT

ip igmp last-member-query-count

Overview Use this command to set the last-member query-count value for an interface.
Use the no variant of this command to return to the default on an interface.
Syntax
ip igmp last-member-query-count <2-7>
no ip igmp last-member-query-count
Default The default last member query count value is 2.
Mode Interface Configuration for a VLAN interface.
Usage This command applies to interfaces configured for IGMP, IGMP Snooping, or IGMP
Proxy.
Example
awplus#
awplus(config)#
awplus(config-if)#
Validation show ip igmp interface
Commands
show running-config
Related ip igmp last-member-query-interval
Commands
ip igmp startup-query-count
742 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Last member query count value.
<2-7>
configure terminal
interface vlan2
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
ip igmp last-member-query-count 3
C613-50057-01 REV A