Username - Allied Telesis AT-IX5-28GPX Manual

U A C
SER CCESS OMMANDS

USERNAME

username
Overview This command creates or modifies a user to assign a privilege level and a password.
NOTE
Any username privilege level that has been modified from the default is shown.
Syntax
username <name> privilege <0-15> [password [8] <password>]
username <name> password [8] <password>
no username <name>
Parameter Description
The login name for the user. Do not use punctuation marks such as single quotes (' '),
<name>
double quotes (" "), or colons ( : ) with the user login name.
The user's privilege level. Use the privilege levels to set the access rights for each user.
privilege
<0-15>
A password that the user must enter when logging in.
password
8
<password>
Mode Global Configuration
Default The privilege level is 1 by default. Note the default is not shown in running-config
output.
116 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
: The default username privilege level of 1 is not shown in running-config output.
A privilege level: either 0 (no access), 1-14 (limited access) or 15 (full
access). A user with privilege level 1-14 can only access higher
privilege levels if an
level the user tries to access and the user enters that password.
A user at privilege level 1 can access the majority of show
commands. A user at privilege level 7 can access the majority of
show commands including platform show commands. Privilege
Level 15 (to access the Privileged Exec command mode) is required
to access configuration commands as well as show commands in
Privileged Exec.
Specifies that you are entering a password as a string that has
already been encrypted, instead of entering a plain-text password.
The running-config displays the new password as an encrypted
string even if password encryption is turned off.
Note that the user enters the plain-text version of the password
when logging in.
The user's password. The password can be up to 23 characters in
length and include characters from up to four categories. The
password categories are:
• uppercase letters: A to Z
• lowercase letters: a to z
• digits: 0 to 9
• special symbols: all printable ASCII characters not included in the
previous three categories. The question mark ? cannot be used as
it is reserved for help functionality.
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
enable password has been configured for the
C613-50057-01 REV A