Security-Password Warning - Allied Telesis AT-IX5-28GPX Manual

U A C
SER CCESS OMMANDS
-
SECURITY PASSWORD WARNING

security-password warning

Overview This command specifies the number of days before the password expires that the
user will receive a warning message specifying the remaining lifetime of the
password.
Note that the warning period cannot be set unless the lifetime feature is enabled
with the
The no security-password warning command disables this feature.
Syntax
security-password warning <0-1000>
no security-password warning
Default The default warning period is 0, which disables warning functionality.
Mode Global Configuration
Example To configure a warning period of three days, use the command:
awplus#
awplus(config)#
Validation show running-config security-password
Commands
show security-password configuration
Related security-password history
Commands
security-password forced-change
security-password lifetime
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
security-password lifetime
Parameter Description
Warning period in the range from 0 to 1000 days. A value 0 disables
<0-1000>
the warning functionality and no warning message is displayed for
expiring passwords. This is equivalent to the no security-password
warning command. The warning period must be less than, or equal
to, the password lifetime set with the
command.
configure terminal
security-password warning 3
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
command.
security-password lifetime
101