Ip Igmp Snooping Report-Suppression - Allied Telesis AT-IX5-28GPX Manual

IGMP IGMP S C
AND NOOPING OMMANDS
-
IP IGMP SNOOPING REPORT SUPPRESSION

ip igmp snooping report-suppression

Overview Use this command to enable report suppression for IGMP versions 1 and 2. This
command applies to interfaces configured for IGMP Snooping.
Report suppression stops reports being sent to an upstream multicast router port
when there are already downstream ports for this group on this interface.
Use the no variant of this command to disable report suppression.
Syntax
ip igmp snooping report-suppression
no ip igmp snooping report-suppression
Default Report suppression does not apply to IGMPv3, and is turned on by default for
IGMPv1 and IGMPv2 reports.
Mode Interface Configuration for a VLAN interface.
Example This example shows how to enable report suppression for IGMPv2 reports for the
VLAN interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Validation show ip igmp interface
Commands
show running-config
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
configure terminal
interface vlan2
ip igmp version 2
ip igmp snooping report-suppression
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
761