Show Ip Mvif - Allied Telesis AT-IX5-28GPX Manual

M C
ULTICAST OMMANDS

SHOW IP MVIF

show ip mvif
Overview Use this command to display the contents of the IPv4 Multicast Routing
Information Base (MRIB) VIF table.
Syntax
show ip mvif [<interface>]
Mode User Exec and Privileged Exec
Example
awplus#
Output Figure 19-6: Example output from the show ip mvif command
Interface Vif
Idx
vlan2 0
Register 1
vlan3 2
Figure 19-7: Example output from the show ip mvif command with the
Interface Vif
Idx
vlan2 0
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
The interface to display information about.
<interface>
show ip mvif vlan2
Owner TTL Local
Module Address
PIM-SM 1 192.168.1.53
1 192.168.1.53
PIM-SM 1 192.168.10.53
interface parameter vlan2 specified
Owner TTL Local
Module Address
PIM-SM 1 192.168.1.53
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Remote Uptime
Address
0.0.0.0 00:04:26
0.0.0.0 00:04:26
0.0.0.0 00:04:25
Remote Uptime
Address
0.0.0.0 00:05:17
729