(Ipv6 Access-List Named Tcp Udp Filter) - Allied Telesis AT-IX5-28GPX Manual

IP 6 H A C
V ARDWARE CCESS ONTROL
( 6 - TCP UDP
IPV ACCESS LIST NAMED

(ipv6 access-list named TCP UDP filter)

Overview Use this ACL filter to add a filter entry for an IPv6 source and destination address
and prefix, with TCP (Transmission Control Protocol) or UDP (User Datagram
Protocol) source and destination ports specified, to the current named IPv6
access-list. If a sequence number is specified, the new entry is inserted at the
specified location. Otherwise, the new entry is added at the end of the access-list.
Note that specifying the send-to-cpu parameter could result in EPSR healthcheck
messages and other control packets being dropped.
The no variant of this command removes a filter entry for an IPv6 source and
destination address and prefix, with TCP or UDP source and destination ports
specified, from the current named IPv6 access-list. You can specify the filter entry
for removal by entering either its sequence number, or its filter entry profile.
Syntax
[<sequence-number>]{deny|permit|send-to-cpu|send-to-mirror|cop
y-to-cpu|copy-to-mirror} {tcp|udp}
{<ipv6-source-prefix/prefix-length>|<ipv6-source-address>
<ipv6-source-wildcard>|host <ipv6-source-host>|any} {eq
<sourceport>|lt <sourceport>|gt <sourceport>|ne
<sourceport>}|[range <start-range><end-range>]
{<ipv6-destination-prefix/prefix-length>|<ipv6-destination-add
ress> <ipv6-destination-wildcard>|host
<ipv6-destination-host>|any} {[eq <destport>|lt <destport>|gt
<destport>|ne <destport>}[range <start-range> <end-range>]
no
{deny|permit|send-to-cpu|send-to-mirror|copy-to-cpu|copy-to-mi
rror} {tcp|udp}
{<ipv6-source-prefix/prefix-length>|<ipv6-source-address>
<ipv6-source-wildcard>|host <ipv6-source-host>|any} {eq
<sourceport>|lt <sourceport>|gt <sourceport>|ne
<sourceport>}|[range <start-range><end-range>]
{<ipv6-destination-prefix/prefix-length>|<ipv6-destination-add
ress> <ipv6-destination-wildcard>|host
<ipv6-destination-host>|any} {eq <destport>|lt <destport>|gt
<destport>|ne <destport>}|[range <start-range> <end-range>]
no <sequence-number>
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
L (ACL) C
IST OMMANDS
)
FILTER
Parameter
<sequence-number>
deny
permit
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
<1-65535>The sequence number for
the filter entry of the selected
access control list.
Specify packets to reject.
Specifies the packets to permit.
915