Ipv6 Mld - Allied Telesis AT-IX5-28GPX Manual

High availability, high power video surveillance poe switch
Hide thumbs Also See for AT-IX5-28GPX:
Table of Contents

Advertisement

MLD
MLD S
C
AND
NOOPING
OMMANDS
6
IPV
MLD

ipv6 mld

Overview
Use this command to enable the MLD protocol operation on an interface. This
command enables MLD protocol operation in stand-alone mode, and can be used
to learn local-membership information prior to enabling a multicast routing
protocol on the interface.
Use the no variant of this command to return all MLD related configuration to the
default (including MLD Snooping).
NOTE
There is a 100 MLD interface limit when applying MLD commands to multiple VLANs.
Only the first 100 VLANs have the required multicast structures added to the interfaces
that allow multicast routing.
There is a 100 MLD interface limit when applying MLD commands to multiple VLANs.
Only the first 100 VLANs have the required multicast structures added to the interfaces
that allow multicast routing.
The device has a 512 MLD group limit for (*, G) and (S,G) entries.
Syntax
ipv6 mld
no ipv6 mld
Default
MLD is disabled by default.
Mode
Interface Configuration for a specified VLAN interface or a range of VLAN
interfaces.
Usage
MLD requires memory for storing data structures, as well as the hardware tables to
implement hardware routing. As the number of ports, VLANs, static and dynamic
groups increases then more memory is consumed. You can track the memory used
for MLD with the command:
awplus#
Static and dynamic groups (LACP), ports and VLANs are not limited for MLD. For
VLANs, this allows you to configure MLD across more VLANs with fewer ports per
VLAN, or fewer VLANs with more ports per VLAN. For LACPs, you can configure
MLD across more LACP groups with fewer ports per LACP, or fewer LACP groups
with more ports per LACP.
Example
awplus#
awplus(config)#
awplus(config)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
794
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
:
show memory pools nsm | grep MLD
configure terminal
ipv6 forwarding
ipv6 multicast-routing
interface vlan1
ipv6 enable
ipv6 mld
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
C613-50057-01 REV A

Advertisement

Table of Contents
loading

Table of Contents