Mac Address-Table Ageing-Time - Allied Telesis AT-IX5-28GPX Manual

S C
WITCHING OMMANDS
- -
MAC ADDRESS TABLE AGEING TIME

mac address-table ageing-time

Overview Use this command to specify an ageing-out time for a learned MAC address. The
learned MAC address will persist for at least the specified time.
The no variant of this command will reset the ageing-out time back to the default
of 300 seconds (5 minutes).
Syntax
mac address-table ageing-time <ageing-timer> none
no mac address-table ageing-time
Default The default ageing time is 300 seconds.
Mode Global Configuration
Examples The following commands specify various ageing timeouts on the device:
awplus#
awplus(config)#
awplus#
awplus(config)#
awplus#
awplus(config)#
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
<10-1000000> The number of seconds of persistence.
<ageing-timer>
Disable learned MAC address timeout.
none
configure terminal
mac address-table ageing-time 1000
configure terminal
mac address-table ageing-time none
configure terminal
no mac address-table ageing-time
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
369