Clear Power-Inline Counters Interface - Allied Telesis AT-IX5-28GPX Manual

P E C
OWER OVER THERNET OMMANDS
-
CLEAR POWER INLINE COUNTERS INTERFACE

clear power-inline counters interface

Overview This command will clear the counters from a specified port, a range of ports, or all
ports on the Power Sourcing Equipment (PSE). If no ports are entered then PoE
counters for all ports are cleared. It will also clear all Power over Ethernet (PoE)
counters supported by the Power Ethernet MIB (RFC 3621).
Syntax
clear power-inline counters interface [<port-list>]
Mode Privileged Exec
Usage The PoE counters are displayed with the
Examples To clear the PoE counters for port1.0.2only, use the following command:
awplus#
To clear the PoE counters for port1.0.1 through port1.0.10, use the
following command:
awplus#
port1.0.1-port1.0.10
To clear the PoE counters for all ports, use the following command:
awplus#
Validation show power-inline counters
Commands
564 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter
<port-list>
clear power-inline counters interface port1.0.2
clear power-inline counters interface
clear power-inline counters interface
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Description
Selects the port or ports whose counters are to be cleared.
show power-inline counters command.
C613-50057-01 REV A