Gvrp Registration - Allied Telesis AT-IX5-28GPX Manual

GVRP C
OMMANDS

GVRP REGISTRATION

gvrp registration
Overview Use this command to set GVRP registration to normal, fixed, and forbidden
registration modes.
Use the no variant of this command to disable GVRP registration.
Syntax
gvrp registration {normal|fixed|forbidden}
no gvrp registration {normal|fixed|forbidden}
Mode Interface Configuration
Default Normal registration is the default.
Usage Configuring a trunk port in normal registration mode allows dynamic creation of
VLANs. Normal mode is the default mode. Validate using the
configuration
Configuring a trunk port in fixed registration mode allows manual creation of
VLANs.
Configuring a trunk port in forbidden registration mode prevents VLAN creation
on the port.
Examples To configure GVRP registration to fixed on port1.0.1, enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable GVRP registration on interfaces port1.0.1, enter the commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation show gvrp configuration
Commands
C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
Parameter Description
Specify dynamic GVRP registration and deregistration of VLANs.
normal
Specify fixed GVRP registration and deregistration of VLANs.
fixed
Specify no GVRP registration of VLANs. VLANs are deregistered.
forbidden
command.
configure terminal
interface port1.0.1
configure terminal
interface port1.0.1
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
gvrp registration fixed
no gvrp registration
show gvrp
595